YOU ARE HERE:
Help - Digital Cable > FAQ - Digital Cable > Set-Top Box/Remote Control > Program Your Remote > Remote Codes for your 3 Device >
If your Remote Codes don't work
| Before continuing, if your device had more than one four-digit code listed, please check whether you tried all of them. If you did try them all and none of them worked, your remote has a feature that will search the library of codes for you. Often manufacturers will put their brand name on devices made by others. The search process allows you to find the correct code for your TV or VCR. Code Search TV Example To start the search, manually turn on your TV or VCR. Simply substitute VCR in the instructions for TV to search for a VCR code. 1. Press TV. Hold SETUP until TV flashes twice. 2. Enter 991. TV will flash twice. 3. Aim the remote at the TV and slowly alternate between pressing POWER and TV. Stop when TV turns off. The code has been found. 4. Press SETUP once to lock in the code. 5. If your device does not turn off, then repeat steps one through three until it does, and then proceed to step four. The device's code is now programmed into the remote control. | ||
