1. Click on the arrow below to find and highlight your VCR manufacturer from the pull-down menu.
2. On the remote control, press and hold DVD/VCR until the four mode indicators flash twice.
3. Now enter the four-digit code listed below:
Many devices have more than one code listed. For these, start with the first code. If that doesn't work, try the second and so on.
The VCR's indicator should flash twice. If it doesn't, press DVD/VCR as described above and try again with the next code. For example, if you have a JVC model, press and hold DVD/VCR until the four mode indicators flash twice, then press 0-0-6-7.
4. After you have entered the correct code, point the remote at your VCR and press POWER. If your VCR turns on or off, you are finished programming for your VCR.
If you have tried all the codes listed for your VCR and it still does not turn on or off, click here.
